Products :


TEST SYSTEMS - ATE:

AGEING SETUP-

Designed to perform aging test on multi output SMPS modules
Monitors and alerts operator on failure of SMPA
In built thermal chamber with settable temperature limits
Voltage and current monitoring of individual section of each SMPS
30 smps's can be tested at one go
Designed to work 24*7 (365 days)

AUTOMATED POWER SUPPLY TESTER-

Flexible configurability
Display of test results in tabular form
Automatic serial number allocation
Sticker design module to cater to various types of adaptors
Pass or fail reports in tabular form
Reports either by serial number or by date
Prints stickers with logo, s.No, Model No etc
Pass/ Fail indication through front panel LEDs with audio alarm

TEST SYSTEMS - BATTERY TEST SYSTEMS

AUTOMATED CHARGE SETUP

Provision for pausing and re-starting the test will be provided in the Software package.
Only battery voltage acquisition, ignoring the individual cell voltage can be Provided.
Calibration option will be provided in the software for calibrating all cell voltages and battery current.
The procedure for calibration will be explained in the instruction manual.
The shunt value can be programmed for acquiring the battery current.
Buzzer indication for end of test indication.
Individual cut-off voltage for each cell will be provided.

i-CHARGER

SMPS based Charger
Constant Current and Constant Voltage Charging
Constant Current Discharge for Capacity Test
Measurement: Voltage / Current / Temperature / cell voltage / AH
Custom Built Jig for individual cells of the battery pack
Manual and Remote mode operation
RS232 interface with easy to use Application software

3 Channel Life Cycle Tester

Designed to meet BIS standards for Life cycle testing of lead acid batteries
Capable of performing capacity
Retention of charge
Resistance to overcharge test
Instant change over from charge to discharge or vice versa
Individual cell voltage monitoring
Rs232 interface with Dedicated application software package

THERMAL BATTERY TEST SYSTEM

Specially designed to test fire the thermal batteries used in missiles
High precision programmable current pulse for ignition
Squib firing electronics for testing squibs / pyros for all-fire and no-fire currents.
Configurable load control
Précised data acquisition.
Dedicated application software package
The test results are presented in both graphical and tabular forms.

RECTIFIERS :

HIGH POWER OIL COOLED RECTIFIER (12V/1500A)

12V, 1000A or 12kW Max.
CC,CV load mode
Dimmer controller linear type rectifier
Measurement: Voltage / Current
Auto / Manual operation selection through front panel
Dedicated START and STOP switches for LOAD
Large LED display
Protected from single phasing, short circuit
Oil cooling